No Fluorescent BrigtenerWNB
应用 Application
纤维素纤维 Cellulosic Fibre
浸染工艺 Imprint Process :
适用于中性及碱性浴(再生纤维可加入适量盐)特别适用于氧漂溶解/稀释
WNB用热水稀释溶液避光保存.
It use for neutral and alkaline baths( An appropriate amount salt for regenerated fibers). Particularly suitable for oxygen bleaching. Dissolve WNB with hot water and store the WNB in a cool, dark place.
溶解度 Solubility : 沸煮时 Boiling 低温时 Low Temperatures
500g/1 50g/1
准备液须蔽光保存 WNB liquid should be kept in the shade
推荐处方纤维素纤维 Recipe:
吸尽法 Siphon Method:
与双氧水同浴 Bath with hydrogen peroxide
0.5-1% WNB
5-10ml/1 H2O2 50%w/w
0.3-1 g/1 TINOCLARITEG
2-3 g/1 片状烧碱 (Flake Caustic soda)
1-2 g/1 ULTRAVONGP250 or INVADINE NF(用于喷射染色机Jet dyeing machines)
浴比 Bath ratio 1:5-1:20
升温时间 Heating Time 20-30 min
处理时间/温度 Process Time 98℃ 45-60min或110℃ 30-60min
推荐处方涤纶/纤维纱混纺:Polyester/fiber yarn blend
吸尽法 Siphon Method:
与双氧水同浴 Bath with hydrogen peroxide
0.5-1% WNB
3-6ml/1 H2O2 50%w/w
0.3-1 g/1 TINOCLARITEG
2-3 g/1 片状烧碱Flake Caustic soda)
1-2 g/1 ULTRAVONGP250 or INVADINE NF(用于喷射染色机Jet dyeing machines)
0.2-0.5 0% UVEEXERNP250 or UVITEX EBF250%
浴比 Bath Ratio 1:5-1:20
升温时间 Heating Time 30-40min
处理时间/温度 Process Time 98℃ 45-60min or 110℃ 30-60min
如处理短织及长丝再生纤维,碱及双氧水用量应减少约50%,漂白加工亦应低于95℃进行.
For processing short-staple and filament regenerated fibers, the usage of alkali and H2O2 should be reduced by about 50%, and bleaching should also be carried out below 95°C.
特性 Feature:
(1) 有明亮白度(带蓝紫光)及优良使用牢度
Bright white color with blue and purple light and excellent wear resistance
(2) 特别适合与双氧水漂白同浴
Perfect for use with hydrogen peroxide bleach
(3) 高亲和力,皂洗牢度优良.
High affinity, excellent soap wash durability.
化学组成 Chemical : 2.2二苯乙烯双磺酸衍生物2,2'-stilbenedisulfonic acid derivatives.
离子型 Lonic : 阴离子性Anionic
物理形态 Appearance : 颗粒 Granule
贮存稳定性Shortage: 贮存期长达一年 One year
稳定性 Stability
PH 7-12
硬水 Hard water 极佳 Good
双氧水漂浴 H2O2 极佳 Good
氯 Chlorine: 不稳定 Unstable
碱 Alkali: 极佳 Good
酸 Acid: 稳定 Stable
